AppsCode held a webinar on “JWT/OIDC Auth method & Automation with KubeVault CLI”. This took place on 20th July 2022. The contents of what took place at the webinar are given below:
- Discussion on
- Automation using
Description of the Webinar
This webinar was focused on the
JWT/OIDC authentication method with
KubeVault, the ins and outs of the
Vault was deployed with
JWT/OIDC authentication method enabled &
OIDC provider configurations were discussed. It was also shown, how
VaultRole can be created to
Vault UI using this
JWT/OIDC authentication method.
Later on the webinar, various features of
KubeVault CLI were discussed, e.g: CRUD operation on Vault
SecretAccessRequest for managing DB user privileges,
SecretProviderClass for the secrets-store CSI driver, etc. Overall, it was shown how
KubeVault CLI can be very handy while using
KubeVault & its CRDs, also automating tedious tasks in general.
A step-by-step guide & the manifest files used during the webinar can be found here .
Take a deep dive into the full webinar below:
Please try the latest release and give us your valuable feedback.
- If you want to install KubeVault, please follow the installation instruction from here .
To speak with us, please leave a message on our website .
To receive product announcements, follow us on Twitter .
If you have found a bug with KubeVault or want to request new features, please file an issue .